IP100x-, IP101x-Bxxx | 8-channel digital input 24 V DC

The IP10xx digital input modules acquire the binary control signals from the process level and transmit them to the higher-level automation unit. The state of the signals is indicated by light emitting diodes. The signals are optionally connected via 8 mm snap type (IP1000, IP1010), M8 (IP1001, IP1011) or M12 (IP1002, IP1012) screw type connectors. These versions are also distinguished by input filters of different speeds.

The sensors are supplied from the box supply voltage US. The auxiliary voltage UP is not used in the input module, but may be connected in order to be relayed downstream.

Technical data	IP1000-Bxxx	IP1001-Bxxx	IP1002-Bxxx
Number of inputs	8
Input connections	8 mm, snap type	M8, screw type	M12, screw type
Nominal input voltage	24 V DC (-15 %/+20 %)
Input filter	3.0 ms
“0“ signal voltage	-3…+5 V (EN 61131-2, type 2)
“1“ signal voltage	11…30 V (EN 61131-2, type 2)
Input current	typ. 6 mA (EN 61131-2, type 2)
Sensor supply	derived from control voltage, max. 0.5 A total, short-circuit-proof
Power supply connection	feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Bit width in the process image	8 inputs
Current consumption from US (without sensor current)	see documentation
Electrical isolation	channels/control voltage: no, between the channels: no, control voltage/fieldbus: depends on the bus system
Operating/storage temperature	0…+55 °C/-25…+85 °C
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 65/66/67 (conforms to EN 60529)/variable
Approvals	CE, UL

Technical data	IP1010-Bxxx	IP1011-Bxxx	IP1012-Bxxx
Number of inputs	8
Input connections	8 mm, snap type	M8, screw type	M12, screw type
Nominal input voltage	24 V DC (-15 %/+20 %)
Input filter	0.2 ms
“0“ signal voltage	-3…+5 V (EN 61131-2, type 2)
“1“ signal voltage	11…30 V (EN 61131-2, type 2)
Input current	typ. 6 mA (EN 61131-2, type 2)
Sensor supply	derived from control voltage, max. 0.5 A total, short-circuit-proof
Power supply connection	feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Bit width in the process image	8 inputs
Current consumption from US (without sensor current)	see documentation
Electrical isolation	channels/control voltage: no, between the channels: no, control voltage/fieldbus: depends on the bus system
Operating/storage temperature	0…+55 °C/-25…+85 °C
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 65/66/67 (conforms to EN 60529)/variable
Approvals	CE, UL