KL1712-0060 | 2-channel digital input terminal 60 V DC

The KL1712-0060 digital input terminal acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. It is possible to connect 60 V DC actuators directly. The Bus Terminal contains two channels that indicate their signal state by means of light emitting diodes.

Technical data	KL1712-0060 | KS1712-0060
Connection technology	4-wire
Number of inputs	2
Nominal voltage	60 V DC
“0“ signal voltage	0…20 V
“1“ signal voltage	40…70 V
Input filter	typ. 10 ms
Input current	> 3 mA, typ. 6 mA
Current consumpt. K-bus	typ. 3 mA
Switching times	10 ms
Electrical isolation	500 V (K-bus/mains voltage); 3,750 V AC, 1 min.
Bit width in the process image	2 inputs
Configuration	no address or configuration setting
Special features	60 V DC rail applications
Weight	approx. 60 g
Operating/storage temperature	0…+55 °C/-25…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all KSxxxx Bus Terminals